| Strip the cable as per photo below.
Make sure the braid and foil is not touching the centre conductor BE ABSOLUTELY SURE!
Unlike fitting a crimp on connector, do not peel back the braid over the sheath. Leave it as per above picture.
Using a twist on F connector, push onto the cable and begin threading the connector onto the plastic sheath. Use pliers if required to get the connector on all the way so that the white material (dielectric) is flush with the inside sleeve of the connector. Now trim the copper centre to around 2-3 mm.
Now trim the centre conductor so it is protruding past the rim of the connector by about 2-3mm.
| 
