Current Category Satellite TV Products > Satellite Dish Mounting Hardware

TIN ROOF MOUNT
	QTY:
SATELLITE TIN ROOF MOUNT This roof mount will support satellite dishes up to 90cm in diameter and is affixed to the batons of the roof.  The mount is suitable for tin roofs, pergolas and any metal surface flat or peaked as the vertical angle of the pole can be adjusted to suit any peak.

2 LEG GUTTER MOUNT
	QTY:
2 LEG GUTTER MOUNT Ideal for any tiled roof.  Simply slide a couple of tiles up, screw the mount to both rafters and slide the tiles back down. Supports up to 90cm dish.  Offers more stability in windy open areas than the single leg unit.

WALL MOUNT
	QTY:
WALL MOUNT Easily installed.  Engineered to support dishes up to 90cm.  Fix to studs or brick wall.

SINGLE LEG GUTTER MOUNT
	QTY:
SINGLE LEG GUTTER MOUNT Ideal for any tiled roof.  Simply slide a couple of tiles up, screw the mount to the rafter and fascia board and slide the tiles back down. This mount is ideal for 65cm dishes but it is recommended to use the double leg gutter mount for larger than 65cm dishes.

WALL BRACKETS FOR POLE MOUNTED DISHES
	QTY:
WALL BRACKETS These wall brackets can be bolted or screwed to brick/timber walls and will support large wall mounted dishes.  Use two per installation.

UNIVERSAL DRAWBAR CLAMP WITH 2 SECTION MAST
	QTY:
UNIVERSAL DRAWBAR CLAMP WITH 2 SECTION MAST Product added March 5th 2009 Our all new, purpose designed, universal drawbar clamp with 2 section telescopic mast.  Made in Australia (satellite dish pictured but not included). Front plate is made from 6mm steel. Rear backing plate is made from 3mm steel. Entire clamp is galvanised. Cut out using plasma cutter for smooth cut edges. Shaft locking pins means the mast can stay on the clamp while driving. Shaft locking pins are hardened steel. Set screws prevent the mast from turning once the satellite has been found. 2 bolts secure the clamp to the drawbar and are fitted with nylock nuts. The clamp is adjustable to suit drawbars from 50mm up to the heavy duty 150mm chassis'. The 2 section mast can be extended to almost 2 metres should it be necessary to obtain a clear line of sight to the satellite location. The mast can be removed if required.