Intended for travellers, this engraved 10.7GHz LNB is the frequency recommended by Optus for use on all Optus satellites. The LNB is engraved with a positive and negative numerical scale to assist with "skewing" the LNB as you travel to different locations around Australia. Can be supplied with the elevation and skew charts if requested in the comments when ordering.
The Strong 10.7GHz LNB is suited for use with all of the Optus satellites (Optus D2 - replaces Optus B3, Optus C1 and Optus D1). With a frequency range of 11.7-12.75GHz and a low 0.6dB noise, tests prove these LNB's to outperform many more expensive brand names on the market. Dipole alignment marks on the throat of the LNB ease installation.
The Star 11.3GHz LO LNB with a noise figure of 0.6dB and gain >60dB. Frequency range from 12.250 to 12.750 GHz recommended for use with Intelsat8, Intelsat2 and Asiasat4 etc. Dual polarity for Vertical and Horizontal. Suitable for use with SelecTV.
Strong's new twin output 10.7GHz LNB is ideal for use with all of the Optus satellites. Frequency range of 11.7-12.75GHz. Polarization skew markings ease installation. Compact, low noise design. Perfect for connecting 2 decoders to a single dish for independent channel operation on either decoder. Well priced.
The Sharp twin output 10.7GHz LO LNB has a frequency range of 11.7-12.75GHz. This LNB is pay TV approved and due to it's frequency range, is recommended for use with all of the Optus satellites. Featuring 2 output F connectors, this LNB enables you to connect 2 satellite decoders to a single satellite dish and operate each decoder independently.
Need cable cut to size and terminated with connectors? Click here.
Suitable for reception of all Optus satellites, this quad output LNB features low noise design and low bit error ratio ensuring better signal lock during inclement weather when compared to standard brand LNB's. Foxtel and Austar approved. Will suit all KU band offset satellite dishes such as those issued by pay TV providers. Connect up to 4 decoders independent of each other.
Run 4 decoders from a single dish independently of each other. Suitable for use with all of the Optus satellites as well as Intelsat8, Asiasat4, Intelsat2 and others. Frequency range 11.7-12.75GHz.
Universal LNBF for use with satellites such as Intelsat 701 and NSS6 due to their wide frequency range of 10.7-12.75GHz. In Australia we tend to stick with single local oscillator LNB's such as 10.7 or 11.3GHz for use with our local Optus satellites. Although these units are not compatible with official Foxtel or Austar decoders, they will work with ALL other decoders and ALL satellites. In Europe, universal LNB's are the most common type available.
This quality LNB is suitable for C Band reception. With a local oscillator of 5.150GHz, it features dual polarity switching between horizontal and vertical. Will fit most C band dishes. These LNB's are the choice of most installers around the country. High performance.
Voltage-controlled H/ V switching (13/ 18 V)
Superior low phase noise for digital application
Low noise temperature
High gain output
Light weight design
100% weatherproof
Scalar ring included Noise Temperature: 15K (maximum)
The recently released Strong L927, C band LNB - A low priced, high performance LNB by Strong Technologies, the SRTL927 is perfect for reception of C band programs. High performance, low noise.
Designed for use with OCS LNB enabled decoders such as the Phoenix 2800A or any of the SRT465x series, this LNB enables multiple decoders to be looped through each ther and operate independently on either horizontal or vertical polarities. Designed for C band reception only.
This LNB has twin outputs with seperate H/V polarities. Can be used with 2 satellite decoders for independent channel control or in conjunction with a multiswitch so multiple receivers can be connected.
LO FREQ - 5.150GHz SCALAR RING INCLUDED DUAL POLARITY TWIN OUTPUT 17K NOISE FIGURE 65dB GAIN INPUT FREQ 3.4-4.2GHz
Designed for use with prime focus dishes NOT offset dishes like common pay TV elliptical dishes. Frequency range of 12.25-12.75GHz. Local oscillator 11.3GHz. May require a prime focus LNB adapter plate listed below.
Got an existing C band dish? Why not replace the LNB with our Turbo 400 and pick up C and KU band from a single dish and LNB. Will require a 2 way diseqc switch as the LNB has two outputs.
C band - 3.4GHz - 4.2GHz LO 5.150GHz KU Band - 12.25GHz - 12.75GHz LO 11.300GHz
This twin LNB holder can be installed to your existing dish and permit reception of 2 satellites. The LNB's are connected together via a 2 way DiSEqC switch (NOT INCLUDED) and your original cable now connects to the switch instead of the dish. Once your decoder has been configured in the Antenna Settings menu, it will automatically switch between channels from either satellite. Common satellite combinations are Optus C1/D2, Optus D2/D1, Optus C1/Intelsat8, Optus D1/Intelsat8. Minimum recommended dish size is 85cm.
As above but able to hold 4 LNB's. Minimum dish size required to receive the KU satellites Optus D2, Optus C1, Optus D1 and Intelsat8 would be 1.0-1.2m in most of Australia. Requires a 4 way DiSEqC switch (NOT INCLUDED) to connect the LNB's. LNB's pictured but not included.
This plate is intended for use with a prime focus dish. The adapter plate attaches to the 3 or 4 support arms on your dish (please specify in comments when ordering) and will then accept a prime focus KU band LNB.
Now you can get up to 3 satellites on a single dish using our fully adjustable triple LNB holder. These units adjust to just about every angle possible for maximum reception of each sat. You will require a 4 way DiSEqC switch to connect each LNB together.
Copyright 2009 SatPlus All Rights Reserved. Theme by
Practical-Webs
